An appropriate solution for every requirement
Nowadays there is a great choice of different fan ranges available for everybody who has to select fans for a ventilation and air-conditioning system. Every execution has been optimised to it’s strengths. The extensive product range of Nicotra Gebhardt offers the opportunity to find just the right fan for every application. Everbody who selects a fan is responsible to make best use of the energy and to respect the admitted limits for noise emission. It is not difficult to make a centrifugal fan for an air conditioning unit a few euros cheaper. But to design it in a way that it saves valuable energy during operation is a real technological challenge.
Hybrid fan
- Very low maintenance required
- Compact solution: Easy installation and maintenance
- Outstanding efficiency levels
- High pressure level
- Low noise
- Low space requirement
Plug fans
- Very low maintenance required
- Compact solution: Easy installation and maintenance
- Very high system efficiency in the medium pressure range
- Low noise level
- With internal or external control electronics
- Low space requirement
Scroll fans (Backward-curved)
- Extremely high output range for air volumes and maximum pressure
- More cost-effective operations with PM/EC motors
- High system efficiency above all with higher pressures.
Scroll fans (Forward-curved)
- Compact design with minimum space requirement for a given duty
- Optimised for operation with low pressure and high volume flow-rate
- Extremely low noise level and low-frequency content
- Best energy efficiency when driven with integrated EC motor and driver
Anwendungen
Fan solutions for smoke extraction
You have to understand fire to master smoke extraction
Perfect smoke extraction in the case of fire not only demands absolute understanding of the techniques used – it also calls for an understanding of the nature of fire and the flow of fumes. Nicotra Gebhardt sets standards in both aspects. We can offer you the world’s largest range of mechanical smoke extraction solutions. With our fans, we master every form of smoke extraction, whatever the application. We thereby ensure maximum safety throughout any building – from the underground car park to the roof – and comply with all the statutory norms for building fire protection.
For example:
with the Jetfan, you save on investments across the board. Thanks to the impulse fan system, there is no need to invest in expensive, large-scale duct systems and high-maintenance smoke extraction flaps. The bigger the garage or ventilation system, the more money you save with the jet system. What’s more, you will benefit from our computer-aided smoke flow simulation during the planning stage. Discover low, low prices for underground car park smoke extraction: with the Jetfan.
The challenges and our solutions:
- Planning security
- Ideal planning for our customers due to use of CFX smoke flow simulation
- Installation
- Selected service partners install the entire system on site on request
- Support
- On request we accompany the projects of our customers from the planning to the acceptance
- Implementation security
- Seamless range of smoke extraction systems ensure implementation for our customers
- Conformity
- The entire range of fans and accessories complies with EN 12101-3
Join the power of a full-range supplier
Filter Fan Units (FFU) made by Nicotra Gebhardt with their perfectly matched components are designed for various kinds of industrial areas requiring clean room technology.
Fans, motors and control units may be of Nicotra Gebhardt standard design or they may be specially adapted to the actual require¬ments of a project. A system of standard sizes makes it possible – by combining them in different ways – to fill in every special shape of a building and, in this way, to create a filter fan ceiling, actively covered by the most effective filter fan units.
Nicotra Gebhardt offers software and hardware especially developed to match the high demands for a perfect clean room system. Uneven air flow distribution can be caused by a poorly designed ventilation system or by the uneven flow of air through the filter.
The Nicotra Gebhardt FFU Monitoring and Control System consists of a FFU control network connected to a computerised FFU Control centre. This FFU System is especially made for the high demands of clean room applications. The FFU Control centre allows control of a large quantity of FFUs in a very flexible and future oriented way.
The challenges and our solutions:
- Casing
- Our customers receive elements for a FFU as well as the complete unit from a single source
- Motors
- the Units are equipped with the suitable drive system
- Monitoring
- We developed control software to monitor different ventilating systems, room configurations and airflows
- Fans
- We are a reliable partner with more than 50 years of experience in fan construction
Fan solutions for Industrial and process Applications
Process air fans are frequently an important component of machines and installations. In these applications they assure functions that would not be possible without a well defined air flow. Of these specially developed, robust fans, there are several standard ranges and a number of customer-specific solutions.
For more than 20 years we have been successfully active in the field of process air technology. With the knowledge of the requirements of your branch our specialists can combine it with their own fan expertise to offer advice and solutions.
In this regard the level of consulting competence extends far beyond the usual level and also includes areas such as:
- the technical flow integration of the fan in the machine
- minimisation of noise emission
- minimum energy consumption
- vibration considerations
- solutions where installation space is at a premium
Our products stand for the highest level of quality and reliability. Moreover we can offer cost effective, modifications tailored to your needs.
In addition to the broad line of standardised centrifugal fans for ventilation and air-conditioning technology and process air technology, as well as the many variants that can be generated with our product line, Nicotra Gebhardt also has years of experience in the area of customer-specific fan solutions. If the requirement is appropriate even totally new developments are possible.
Many successful projects for our customers in different industries speak for themselves.
The challenges and our solutions:
- Process and cost optimisation
- Our fan systems are customised optimally to the needs of our customers
- Partnership
- By working in close collaboration with our customers, we develop just the right fan system for our customers
- Security for the future
- The advancement of our products ensures that our customers’ systems can be sustainably upgraded
- Planning and functional reliability
- Our high standards are ensured through standardised performance data and high production quality
proSELECTA
Simple and reliable
fan configurator